|
|
Home > Products > Optical Products > Mirrors > Metallic HR Mirror |
|
Metallic HR Mirror
|
 
Metallic Mirrors, aslo descript a good mixture of performance and value. These broadband coatings are relatively insensitive to wavelength, angle of incidence, and polarization. However high-energy levels should be avoided. Such metallic HR mirror are widely use in projection optics systems, imaging optics systems, Optical Measurement System, sensors or laser measurement systems. |
|
| Plano-Flat Metallic HR Mirror |
|
|
|
|
| Specifications: |
| Material |
BK7 grade A optical glass, Fused Silica etc. |
| Diameter Tolerance |
+0.00/-0.15mm |
|
Thickness Tolerance |
¡À0.2mm |
| Clear Aperture |
>Central 85% of diameter |
| Surface Quality |
60-40 S/D |
|
Parallelism |
< 1 arc minute |
|
Wavefront Distortion |
¦Ë/10 @632.8nm |
| Protective Bevel |
<0.25mm x 45¡ã |
|
Coating |
Al protect, Al VIS enhanced, Ag protect, Au protect | |
|
| BK7 Plano-Flat Dielectric HR Mirror Standard Products: |
|
Part No. |
Size (mm) |
Flatness |
Coating |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
Note: Plano-Convex HR Mirror (MPX), Plano-Concave HR Mirror (MPV), Plano-Convex Cylindrical HR Mirror (MPCX), Plano-Concave Cylindrical HR Mirror (MPCV) and Other sizes or coatings are available upon request.
The general tolerance specifications above provide a guideline regarding manufacturing capabilities for optics ranging in size from 1-300mm. The manufacturing limits are not absolute; tighter tolerances may be possible. Part specific tolerances may vary depending on component size, shape, and/or material. | |
|
